USB Power Delivery Controller
((Product Brief)
The EJ899 is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revison 3.0. The PD controller could negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.
The EJ899 can be configured by serial EEPROM or internal MTP or system controller to different modes like DFP only, UFP only or DRP and support Dual-Data Role Swap and Dual-Power Role Swap.
The EJ899 integrates 3.3V to 1.2V LDO to reduce component count and PCB space.
- Notebook
- Docking Station
- Tablet
- USB Type-C & Power Delivery Specification
- Support DRP mode
- Support Power Role SWAP command to be provider/consumer mode
- Support Data Role SWAP command to be DFP/UFP mode
- Support all PD profile
- Support baseband BMC coding on USB Type-C spec
- Support connection detection on Configuration Channel
- Integrated Vconn power switch.
- Pull-up/down resistor (Rp/Rd) integrated
- DP Alt Mode on USB Type C v1.0a Specification
- Support HPD mechanism
- Support different pin assignments A/B/C/D
- USB Billboard Device
- Vbus protection including OVP/UVP/OCP/SCP and OTP
- Legacy USB Smart Charge including BC1.2/QC3.0
- Power saving
- EJ899 could enter suspend mode to sync with system power state
- EJ899 could keep charging plug-in device while system is in suspend mode
The EJ899 is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revison 3.0. The PD controller could negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.
The EJ899 can be configured by serial EEPROM or internal MTP or system controller to different modes like DFP only, UFP only or DRP and support Dual-Data Role Swap and Dual-Power Role Swap.
The EJ899 integrates 3.3V to 1.2V LDO to reduce component count and PCB space.
- Notebook
- Docking Station
- Tablet
- USB Type-C & Power Delivery Specification
- Support DRP mode
- Support Power Role SWAP command to be provider/consumer mode
- Support Data Role SWAP command to be DFP/UFP mode
- Support all PD profile
- Support baseband BMC coding on USB Type-C spec
- Support connection detection on Configuration Channel
- Integrated Vconn power switch.
- Pull-up/down resistor (Rp/Rd) integrated
- DP Alt Mode on USB Type C v1.0a Specification
- Support HPD mechanism
- Support different pin assignments A/B/C/D
- USB Billboard Device
- Vbus protection including OVP/UVP/OCP/SCP and OTP
- Legacy USB Smart Charge including BC1.2/QC3.0
- Power saving
- EJ899 could enter suspend mode to sync with system power state
- EJ899 could keep charging plug-in device while system is in suspend mode